Reading Time 4 Minutes
Best Angled Finish nailers are an excellent tool for carpenters and even for homeowners to have around the house. They make finish carpentry work go much faster than manually nailing trim and molding pieces to walls.
Keep in mind that a nailer is not the only piece of equipment you’ll need to finish the work of this kind but more on that later.
Professional Carpenters: What to look for when choosing a best-angled finish nailer
Check Best Angled Finish Nailers on Amazon.com
Contents
Best Finish Nailers for Carpenters
Realistically, a professional carpenter is going to have a range of pneumatic nailers at their disposal. There are different nailers for different jobs and all take a different width and length of the nail. There are 15, 16, 18, and 23 gauge nailers available.
A carpentry professional is going to need all of those types of nailers to cover the broad spectrum of jobs that they may do. When it comes to the gauge or size of the nail, the lower the number, the larger the nail. The 15 and 16 gauge nailers are the most versatile and widely used of all the sizes. They can be used to hang thicker wall molding and baseboards, door casings, and other thicker trim pieces.
Smaller Gauge Nailers
Smaller gauge nailers are used for wood to wood connections and for finer trim pieces that would potentially be split by the larger gauge nails. They leave smaller holes and trim pieces are less likely to need filler after being nailed.
Which Gauge is Better?
Professional carpenters are going to have a much broader range of applications that different gauge nailers are used for so more than one is almost essential. If a pro has to choose, a 15 gauge and a 23 gauge would be good bets. Check Gauge Sizes on Amazon.com
Finish Nailers for Home Owners
What to look for when choosing the best-angled finish nailer like we mentioned before, a professional carpenter is going to need a range of nailers because they have to be prepared for any potential jobs that come their way.
However, a homeowner is only going to need one type of nailer. So if you only have one shot to pick the right nailer for any home improvement job you might encounter, which one do you pick?
What Types of Work Will You Be Doing?
When choosing a nailer, first think about what types of jobs you’ll be doing with it. Although that could vary, most homeowners are going to be using their nailers to hang a trip or molding. These are everyday carpentry tasks because homeowners often lay their flooring or do their own painting. Both things that may require baseboards and door trim to be removed.
Smaller Gauge Nailers
Most of the smaller gauge nailers (18 and 23) do not drive nails that are strong or long enough to hold baseboards and other types of trim onto drywall.
These types of nailers are great for smaller projects or for wood-on-wood connections but those are not as common as just hanging baseboards.
Larger Gauge Nailers
For homeowners, the 15 and 16 gauge nailers are the best bet. The nails that they drive are larger but not so large that they will split some of the most common materials used for baseboards. They are great, well-rounded tools that will allow you to complete most of the jobs you will encounter as a homeowner that requires a pneumatic nailer.
Accessories for Your Nailer
It’s important to point out that you will need more than just the pneumatic nailer and nails for your jobs. These tools run on compressed air that comes from an air compressor. You will also need a length of hose for an air compressor and all applicable attachments so that the hose can be affixed to the pneumatic nailer. Check accessories for your nailers on Amazon.
Types of Compressors
It doesn’t really matter whether you are a contractor or home owner, a smaller compressor usually does the trick for pneumatic nailers. The only scenario where you would want a larger one is if you were using a framing nailer.
For Best angled finish nailers, a small 5-6 gallon compressor with 150 to 200 max PSI (pounds per square inch air compression) will do the job just fine. These types of compressors are small, portable, easy to carry, and can run off of regular 220-volt electric outlets without blowing a circuit.
The hose you get should be at least 25 feet. Of course a professional will want something longer but for the homeowner, 25 feet will be plenty. These hoses often do not come with adapters and other hardware that will enable you to connect it to your compressor and your nailer. Adapter kits can be found for 10 to 12 dollars.
Once you have a compressor, a hose, your adapter kit, and a pneumatic nailer, you’ll be all set to tackle that next carpentry finishing job.
Conclusion
Whether carpenters or homeowners. It’s a must to first check the type of project for which you need the best-angeled finish nailer. If the job is simple and easy then you can even use an electric finish nailer. If the job is heavy or it’s your everyday task then you can go for DEWALT 20V MAX Finish Nailer which is really a good one for heavy tasks.
Watch this great review of different finish nailers to understand more accurately what you should buy for your tasks. You will see a great number of nailers reviewed in this YouTube video.
Recent Posts
It doesn’t matter if you are a carpenter or a professional woodworker, having the best framing nail gun in your toolbox that can save your energy and time is essential. And let’s be honest here....
Palm nailers are tools that help you get into the small spaces where it's not possible to work with a hammer. Palm nailers are easy to use and save a lot of precious time and energy. We have put...